Baileigh Industrial DP-1000G, Operator'S Manual

Page: 11 / 44

8
8
MACHINE DESCRIPTION
The Baileigh DP-1000G is a very economical gear head drill press that can run in any
fabrication or machine shop using only 110 volts of power. It can drill through mild steel with up
to a 1" (25.4mm) drill bit. It comes standard with a heavy cast iron base and adjustable table.
To reduce flexing this gear head drill press uses
a column with a 4” (101.6mm) diameter. The
gear head also can be adjusted up or down on the column. The transmission offers multiple
speeds that are perfect for drilling and tapping an array of different materials. The DP-1000G
comes standard with a halogen light and protective guarding.
TECHNICAL SPECIFICATIONS
Drill Capacity
1” (25.4mm)
Tapping Capacity
.625” (15.875mm)
Spindle Speed 125, 420, 535, or 1740 rpm
Spindle Taper MT 3
Spindle Travel
5.3” (135mm)
Tables Dimensions (L x W) 19.75 x 13.75 (501 x 350mm)
Base Dimensions (L x W) 15.5 x 19.5 (393 x 495mm)
Motor 1.5hp (1.12kw), 110V, 60Hz, 14A
Power Supply 110V, 60Hz
Shipping Dimensions (L/W/H)
66” x 23” x 29” (1676 x 584 x 737mm)
Shipping Weight 484 lbs (220kg)
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990 and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileigh.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos and illustrations used in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.