Baileigh Industrial DP-1000G, Operator'S Manual

Page: 13 / 44

10
10
TRANSPORTING AND LIFTING
Follow these guidelines when lifting with truck or trolley:
•
The lift truck must be able to lift at least 1.5
– 2 times the
machines gross weight.
•
Make sure the machine is balanced. While transporting,
avoid rough or jerky motion, and maintain a safe
clearance zone around the transport area.
•
Use a fork lift with sufficient lifting capacity and forks that
are long enough to reach the complete width of the
machine.
•
Remove the securing bolts that attach the machine to the
pallet.
•
Approaching the machine from the side, lift the machine on
the frame taking care that there are no cables or pipes in
the area of the forks.
•
Move the machine to the required position and lower
gently to the floor.
•
Level the machine so that all the supporting feet are taking
the weight of the machine and no rocking is taking place.
Follow these guidelines when lifting crane or hoist:
•
Always lift and carry the machine with the lifting holes
provided at the top of the machine.
•
Use lift equipment such as straps, chains, capable of lifting
1.5 to 2 times the weight of the machine.
•
Take proper precautions for handling and lifting.
•
Check if the load is properly balanced by lifting it an inch or
two.
•
Lift the machine, avoiding sudden accelerations or quick
changes of direction.
•
Locate the machine where it is to be installed, and lower
slowly until it touches the floor.
NOTICE: Lifting and carrying operations should be carried out by skilled workers, such as a
truck operator, crane operator, etc. If a crane is used to lift the machine, attach the lifting
chain carefully, making sure the machine is well balanced.