Baileigh Industrial DP-1000G, Operator'S Manual, Page: 22 / 44

19
19
13. At the end of a drilling or tapping operation, press the stop button ( I ) to turn OFF the
machine.
In the event of incorrect operation or dangerous conditions, the machine can be stopped
immediately by pressing the
E-STOP button ( H ). Twist the button clockwise ( cw ) to reset.
MATERIAL SELECTION
When selecting materials keep these instructions in mind:
•
Material must be clean and dry. (without oil)
•
Material should have a smooth surface so it processes easily.
•
Dimensional properties of material must be consistent and not exceed the machine capacity
values.
•
Chemical structure of material must be consistent.
•
Buy certificated steel from the same vendor when possible.
CAUTION:
It must be determined by the customer that materials being
processed through the machine are NOT potentially hazardous to operator or
personnel working nearby.