Baileigh Industrial 1013715, Operator'S Manual

Page: 27 / 52

24
24
Changing the Saw Blade
To change the saw blade:
1. Loosen the screw (A) enough to rotate the cover plate
and expose the hub. Lightly tighten the screw.
2. Release and pivot the mobile guard (B) by removing the
hex socket screw (C).
3. Place a block of wood into the vise.
4. Lower the machine head to rest the saw blade on the
block of wood.
5. Using a hex wrench, remove the lock bolt (D) in a
clockwise (cw) direction. (Left turn thread).
6. Remove the blade (E), blade washer, and locating pin
from the spindle and remove from machine.
7. Place washer and locating pin onto the replacement
blade and follow above procedure in reverse.
8. Check for proper blade rotation.
MATERIAL SELECTION
When selecting materials keep these instructions in mind:
•
Material must be clean and dry. (without oil)
•
Material should have a smooth surface, so it processes easily.
•
Dimensional properties of material must be consistent and not exceed the machine capacity
values.
•
Chemical structure of material must be consistent.
•
Buy certificated steel from the same vendor when possible.
CAUTION:
It must be determined by the customer that materials being
processed through the machine are NOT potentially hazardous to operator or
personnel working nearby.
B
C
A
E
D