Baileigh Industrial 1013715, Operator'S Manual

Page: 26 / 52

23
23
MACHINE ADJUSTMENTS
Setting Saw Blade Head Stop
To adjust the saw blade head DOWN stop:
1. Turn the stop bolt (A) up or down as desired to set the
stop position of the blade. DO NOT allow the blade to be
lowered to contact the vise.
To adjust the saw blade head UP stop:
2. Loosen the stop bolt (B) jam nut.
3. Turn the stop bolt up or down as desired to set the UP
stop position.
4. Hold the stop bolt (B) in position and tighten the jam nut.
Blade Guard Adjustment
To adjust the blade guard to cover the blade:
1. The moveable guard should overlap the stationary guard
just enough to completely cover the blade.
2. If the blade is exposed at the overlap point (A) loosen
the two socket head cap screws (B) and slide the link (C)
up or down as needed to cover the blade.
3. Hold the link (C) in position and tighten the two socket
head cap screws (B).
WARNING:
BEFORE PERFORMING THE FOLLOWING OPERATIONS,
THE ELECTRIC POWER SUPPLY AND THE POWER CABLE MUST BE COMPLETELY
DISCONNECTED.
A
B
C
B
A