8
DL MCS
Downlink Modulation and Coding Scheme - an indication of channel conditions
determining throughput in the downlink
UL MCS
Uplink Modulation and Coding Scheme - an indication of channel conditions
determining throughput in the uplink
SINR1 and SINR2
The Signal-to-Interference-plus-Noise Ratio reflects the signal strength of the signal
received from the two antennas in the eNB, expressed in decibels (dB)
NOTE: Additional SINR values are reported when a transmitting device is using more
than two antennas.
RSRP1 and RSRP2
The Reference Symbol Received Power is an indication of the average power of the LTE
reference signals over the entire bandwidth. RSRP is reported for each transmit
antenna. These signals must be at a high enough level for the CPE to attach to an eNB.
Throughput Statistics
DL
The current downlink data throughput rate, in Kbps
UL
The current uplink data throughput rate, in Kbps
Average
The average DL and UL data throughput rates, in Kbps, for this CPE in the last 3 minutes
Peak
The peak DL and UL data throughput rates, in Kbps, for this CPE in the last 3 minutes
Sum
The total (sum) DL and UL data throughput rates, in Kbps
APN Status
APN Number
Access Point Name (gateway) connection to other network devices. At least one APN
must be configured to establish the TR-069 connection to the CloudCore or other NMS
Enable
Indicates if the APN is enabled or disabled
MAC Address
MAC address of the APN gateway
Connection Type
Type of network connection
IP Address
IPv4, IPv6, or IPv4v6 address of the APN gateway
DNS server
Domain Name Server IP address
LAN Status
MAC Address
MAC address of the LAN device, e.g., router, to which the CPE is connected
IP Address
The IP address of the LAN device
Netmask
The subnet mask of the LAN device
Devices List
Index
Numerical ID assigned to each smart device connected through the ODU CPE
Device Name
The name of each smart device connected through the CPE
MAC Address
The MAC address of each smart device connected through the CPE
IP Address
The IP address of each device connected through the CPE
Lease Time
Amount of time a smart
device’s IP address has been leased
Type
Type of smart device connection
Figure 7: ODU CPE Signal Intensity (Strength) - Atom OD04L Example
