32
Figure 53: WEB Setting
Table 15: WEB Setting
Field Name
Description
HTTP
Select the check box next to Enable to log in to an HTTP Web address
HTTPPort
Enter the HTTP port number to be used. Range is 80 to 65,535. Default is port 80.
HTTPS
Select the check box next to Enable to log in to an HTTPS Web address
Redirect HTTPS
Select the check box to allow HTTP addresses to be redirected to more secure HTTPS
addresses
Allow HTTPS Login
From WAN
Select the check box next to enable log in to an HTTPS Web address from the WAN
HTTPSPort
Enter the HTTPS port number to be used. Range is 80 to 65,535. Default is port 80.
3.9.4 FTP Auto Upgrade
The FTP Auto Upgrade feature is used for over-the-air (OTA) upgrades. The CPE will detect a new version of
firmware on the dedicated FTP server, if available, and will automatically upgrade to the new version.
If you are using a dedicated FTP server for this purpose, select the
Enable
check boxes next to
FTP Auto
Upgrade
and
Check New FW after setup
.
Enter the FTP server IP address and the
Path And File
text suffix. If login permissions are required to access the server, enter the username and password. To
configure a set interval for the CPE to check the server for new firmware, select the check box next to
Use
custom Interval
and enter the interval time, in hours. The range is 1-2400 hours.
Figure 54: FTP Auto Upgrade
