36
3.9.8 Ping Watchdog
Ping Watchdog is a feature used for detecting the Internet connection state of the CPE. If the CPE cannot
connect to the Internet, if this feature is enabled it will reset the LTE module in the CPE firmware or reboot
the CPE in an attempt to recover the connection.
To enable the watchdog function (Figure 58):
1.
Select the check box next to
Enable
and enter an IP address accessible by Internet for the CPE to try
to ping.
2.
Set the period of time, in seconds, for the ping to timeout. The range is 1-65535 seconds.
3.
Enter the number of times to try to ping the address, in the range of 1-65535 times.
4.
Enter the maximum number of times the CPE can try the ping but fail before the CPE initiates a
reboot. The range is 1-65535 times.
Figure 58: Ping Watchdog
3.9.9 Diagnosis
The System > Diagnosis menu provides 2 types of diagnostic tests that may be used for troubleshooting
connection issues: Ping and Traceroute (Figure 59)
Figure 59: Diagnosis
