10
PRINT 24V SYSTEM
RESULT? YES
14. SOC & SOH Display: Press directional keys to see SOC & SOH:
GOOD & PASS
SOC:
xx.xx V
■■■■■■■■■□ 90%
GOOD & PASS
SOH:
xxxx
CCA/SAE
■■■■■■■■■□ 90%
15. Test Code:
Press <Enter> to get Test Code.
CODE
xxxxxxxxxxxx
16. Press the ◄ ► key to select result printing: YES or NO.
Press «ENTER» to confirm your choice.
PRINT RESULT?
YES/NO
*24V System Test Printing: The printer will not
function for 24 Volt batteries system test printing.
The 24V system test result will be recorded till you
hook up to a 12V battery and the right screen
shows up. Please select “YES” and press enter
key to print the result and then disconnect the clamps. The screen will appear again after
you reconnect the clamps. Please select “NO” and press the enter key to go back to the
main menu.
17. Press «ENTER» return to MAIN MENU or remove the test clamps from the battery posts after
completion of testing batteries to end test.
SYSTEM TEST:
1. Select “SYSTEM TEST” from the main menu.
SYSTEM TEST
xx.xx V
2. Turn off all vehicle accessory loads such as light, air
conditioning, radio, etc. Before starting the engine.
TURN OFF LOADS
START ENGINE
3. When the engine is started, one of the three results will be displayed along with the actual
reading measured.
CRANKING VOLTS NORMAL
The system is showing normal draw. Press «ENTER» to
perform the charging system test.
CRANKING VOLTS
xx.xx V
NORMAL
