INSTRUCTIONS
Electronic Security Box BH4 C
EAN Code: 4024506324589
Red light
Green light
Knob
LCD display
Numerieal keypad
Battery cover plate
Red button
Door
Red button
INSTRUCTIONS
CAUTION:
Do not keep the keys in the Security Box.
1. OPENING THE SECURITY BOX WITH OVERRIDE KEY
For your convenience, we have engineered a manual override system for your
Security Box. To open the door of the safe for the first time, just remove the battery
cover plate (d) (see diagram 1). You will find the keyhole, insert the key into the
keyhole and turn it in a counter-clockwise direction, turn the knob (a) in a clockwise
direction. This will manually open your Security Box.
2. INSTALLING THE BATTERIES
The Security Box requires 4×size ‘AA’ (1.5V R06) batteries.
To install the batteries, just remove the battery cover plate (d) (see diagram 1) and
install the four batteries.
Ensure the + and – positions are correct. The display (e) will scan the status of the
electronic lock system automatically. If it is in order, the display will show ‘good’.
3. OPENING AFTER INSTALLING THE BATTERIES
To open the door of the Security Box, press the button ‘START’ (c) (see diagram1),
the display on the panel will show ‘--------’, then input one of the two sets of
factory-preset codes: 0,0,0,0 (user code) or 8,8,8,8 (master code) immediately and
confirm by pressing the button ‘START’. The green light (f) will be on with the
display showing ‘OPEN’ and open the door using the knob (a) within 4 seconds.
If you do not want the display to show your codes when you open the safe, just
press the button ‘START’ twice at the first time of pressing and other steps are the
same.
(Diagram 1)
GBR
31
32
Summary of Contents for Security Box BH4 C
Page 44: ......
