USER MANUAL –
M625/M325 DRIVE SYSTEM
11
INS
TALL
A
TION
6.4 Battery Installation
For correct insertion, the battery must be
connected, ensuring all pins are correctly
connected to the battery holder. When pushing
the battery into position. Make sure that the
battery has clicked into the locking mechanism
before you set off.
1. Fasten the slide rail with 2pcs hose clamp
onto the down tube. Please notes it needs
fit rubber for hose clamp before assembly.
2. First rotate the lock to the open posi-
tion, then insert the battery into the slide
rail, and push the battery into the down
bracket. Finally rotate the key and lock the
battery.
NOTE: The key can only be removed after
the battery is locked, otherwise it can not
be removed.
3. Connect the power cable.
B (red)
Drive unit + (red)
Battery - (black)
Drive unit - (black)
A
a
B
b
4. Connect the battery communication cable.
Male connector of battery
Female connector from driver unit
D
d
