USER MANUAL –
M625/M325 DRIVE SYSTEM
19
DISPL
A
Y
8.6 Normal Operation
8.6.1 Switching the System ON/
OFF
Press and hold
(>2S) on the display to
turn on the system. Press and hold
(>2S)
again to turn off the system.
If the "automatic shutdown time" is set to
5 minutes (it can be set with the "Auto Off"
function, See
"Auto Off"
), the display
will automatically be turned off within the
desired time when it is not in operation.
If the password function is enabled, you
must enter the correct password to use the
system.
When turn on the system, you can see the
disclaimer, and you can press
or
to
select the consent or not prompt at next
time and press
to confirm.
8.6.2 Selection of Support Levels
When the display is turned on, press the
or
(<0.5S) button to switch to the sup-
port level, the lowest level is 0, the highest
level is 5. When the system is switched on,
the support level starts in level 1. There is no
support at level 0.
8.6.3 Selection Mode
Briefly press the
(0.5s) button to see the
different trip modes.
Trip: daily kilometers (TRIP) - total kilometers
(ODO) - Maximum speed (MAX) - Average
speed (AvG) - Range (RANGE) - Energy
consumption (CALORIES (only with torque
sensor fitted)) - Travel time (TIME).
8.6.4 Headlights / backlighting
Hold the
(>2S) button to activate the
headlight and taillights.
Hold the
(>2S) button again to turn
off the headlight. The brightness of the
backlight can be set in the display settings
"Brightness"
. If the display / Pedelec is
switched on in a dark environment, the
display backlight/headlight will automatically
be switched on. If the display backlight/
headlight has been manually switched off,
the automatic sensor function is deactivated.
You can only turn on the light manually,
after switching on the system again.
