USER MANUAL –
M625/M325 DRIVE SYSTEM
28
Error
Declaration
Troubleshooting
15
Error with the temperature sensor
inside the controller
Please contact your retailer.
21
Speed sensor Error
1. Restart the system
2. Check that the magnet attached to the spoke is
aligned with the speed sensor and that the distance
is around 5 mm.
3. Check that the speed sensor connector is connect-
ed correctly.
4. If the error persists, please contact your retailer.
25
Torque signal Error
1. Check that all connections are connected correctly.
2. If the error persists, please contact your retailer.
26
Speed signal of the torque sensor
has an error
1.Check the connector from the speed sensor to
make sure it is connected correctly.
2.Check the speed sensor for signs of damage.
3.If the problem persists, please contact your retailer.
27
Overcurrent from controller
Please contact your retailer.
30
Communication problem
1. Check all connections are correctly connected.
2. If the error persists, please contact your retailer.
33
Brake signal has an error
(If brake sensors are fitted)
1. Check all connectors.
2. If the error continues to occur, please contact your
retailer.
35
Detection circuit for 15v has an
error
Please contact your retailer.
36
Detection circuit on the keypad has
an error
Please contact your retailer.
37
WDT circuit is faulty
Please contact your retailer.
41
Total voltage from the battery is
too high
Please contact your retailer.
42
Total voltage from the battery is
too low
Please contact your retailer.
