USER MANUAL –
M625/M325 DRIVE SYSTEM
33
B
A
TTER
Y
9.2.2 Removing the Battery
First rotate the lock to the open position,
then pull the battery up along the slide rail
on the down bracket. Finally remove the
battery from slide rail.
Hold the battery tightly as it is heavy.
9.2.3 Removing the Battery Lock
NOTE: If the lock is damaged or the key is
lost, please contact the after-sales service.
First unscrew six screws on the battery,
remove the cover and take out the lock
from battery.
9.2.4 Charging the Battery
Use only the original battery charger supplied to
you, as there is a risk of fire or explosion if the
incorrect charger is used.
You can charge your battery when mounted on
the bike or when it is removed.
Lithium-ion batteries are not subject to any
memory effect. You can recharge your battery
at any time, even after short journeys.
Charge the battery at temperatures between 0°C
and 45°C (ideally at room temperature approx.
20 °C). Give your battery enough time to reach
this temperature before charging.
Before charging, read the instructions on the
charger.
1. First insert the plug of charger into the
power socket, then the Logo LED will blink
in blue.
blue
2. As soon as the charger is connected to the
battery, the Logo LED will turn to light in
blue (3 sec.), then turn to long light in red,
it start to charge.
red
