USER MANUAL –
M625/M325 DRIVE SYSTEM
27
DISPL
A
Y
8.8 Error Code Definition
The display can show the errors of a pedelec. If an error is detected, the wrench icon
appears on the display and one of the following error codes will be displayed.
Note:
Please read the description of the error code carefully. If you see the error code, restart the
system first. If the problem is not resolved, please contact your dealer.
Error
Declaration
Troubleshooting
04
The throttle is not back in its cor-
rect position.
Check the throttle can adjust back into its correct
position, if the situation does not improve, please
change to a new throttle.(only with this function)
05
The throttle has fault.
1. Check the connector of throttle whether they are
correctly connected.
2. Disconnect the throttle, If the problem still occurs,
please contact your retailer.
(only with this function)
07
Overvoltage protection
1. Remove the battery.
2. Re-Insert the battery.
3. If the problem persists, please contact your retailer.
08
Error with the hall sensor signal
inside the motor
Please contact your retailer.
09
Error with the Engine phase’s
Please contact your retailer.
10
The temperature inside the engine
has reached its maximum protec-
tion value
1. Turn off the system and allow the Pedelec to cool
down.
2. If the problem persists, please contact your retailer.
11
The temperature sensor inside the
motor has an error
Please contact your retailer.
12
Error with the current sensor in the
controller
Please contact your retailer.
13
Error with the temperature sensor
inside of the battery
Please contact your retailer.
14
The protection temperature inside
the controller has reached its maxi-
mum protection value
1. Turn off the system and let the pedelec cool down.
2. If the problem persists, please contact your retailer.
