![background image](http://html1.mh-extra.com/html/bafang/dp-c230-can/dp-c230-can_manual_3425387015.webp)
15
Error
Declaration
Troubleshooting
37
WDT circuit is faulty
Using the BESST Tool, update the controller to see if
this resolves the problem. If not, change the
controller or contact your supplier.
41
Total voltage from the battery is
too high
Change the battery.
42
Total voltage from the battery is
too low
Charge the battery. If the problem persists, change
the battery.
43
Total power from the battery
cells is too high
Change the battery.
44
Voltage of a single cell is too
high
Change the battery.
45
Battery temperature is too high
Let the ebike cool down.
If problem persists, change the battery.
46
The temperature of the battery
is too low
Allow the battery to warm to room temperature. If
the problem persists, change the battery.
47
SOC of the battery is too high
Change the battery.
48
SOC of the battery is too low
Change the battery.
61
Switching detection defect
1. Check the gear shifter is not jammed.
2. Change the gear shifter.
62
Electronic derailleur cannot
release.
Change the derailleur.
71
Electronic lock is jammed
1. Using the BESST Tool, update the display to see
if it resolves the problem.
2. Change the display. If the problem still occurs,
change the electronic lock.
81
Bluetooth module has an error
Using the BESST Tool, re-update the software onto
the display to see if it resolves the problem.
If not, change the display.
Summary of Contents for DP C230.CAN
Page 16: ...16...