![background image](http://html1.mh-extra.com/html/bafang/dp-c230-can/dp-c230-can_manual_3425387014.webp)
14
Error
Declaration
Troubleshooting
26
Speed signal of the torque
sensor has an error
1. Check that all connectors are connected correctly.
2. Connect the ebike to the BESST system to see if
the speed signal can be read by the BESST tool.
3. Change the display to see if the problem is solved.
4. Using the BESST Tool, update the controller.
If the problem persists, change the torque sensor
or contact your supplier.
27
Overcurrent from controller
Using the BESST Tool, update the controller. If the
problem persists, change the controller or contact
your supplier.
30
Communication problem
1. Check all connectors on the ebike are correctly
connected.
2. Using the BESST Tool, run a diagnostics test to see
if it can pinpoint the problem.
3. Change the display to see if the problem is solved.
4. Change the EB-BUS cable to see if it resolves the
problem.
5. Using the BESST tool, re-update the controller
software. If the problem persists, change the
controller or contact your supplier.
33
Brake signal has an error
(If brake sensors are fitted)
1. Check all connectors are correctly connected on
the brakes.
2. Change the brakes to see if the problem is solved.
3. If problem persists, change the controller or
contact your supplier.
35
Detection circuit for 15V has
an error
Using the BESST Tool, update the controller to see if
this resolves the problem. If not, change the
controller or contact your supplier.
36
Detection circuit on the keypad
has an error
Using the BESST Tool, update the controller to see if
this resolves the problem. If not, change the
controller or contact your supplier.
Summary of Contents for DP C230.CAN
Page 16: ...16...