BAFANG DP C230.CAN, Manual

Page: 10 / 16

Press the or button (<0.5 s) to select
“Wheel Size” in the “Information” menu, and
then press the button (<0.5 s) to access
it. Press the button (<0.5 s) again to
return to the "Information" menu.
“Wheel Size” is displayed for information
only and cannot be changed.
After the display is turned on, press the
and button at the same time (>2 s), to
access the “PROPERTIES” menu.
Press the or button (<0.5 s) to select
button (<0.5 s) to access the following
information:
10
1.8.2 “Information”
Press the or button (<0.5 s) to select
“Speed Limit” in the “Information” menu,
and then press the button (<0.5 s) to
access it. Press the button (<0.5 s) again
to return to the "Information" menu.
1.8.2.1 Wheel Size
1.8.2.2 Speed Limit
1.8.2.3 Battery Info
Content Explanation
b01
Current temperature in
degrees (°C)
b04 Total Voltage (V)
b06 Discharge Current (A)
b07 Remaining Capacity (mAh)
b08 Full charged Capacity (mAh)
b09 Default Loader Status (%)
b10 Instant charge (%)
b11 Charging cycles (number)
b12
Maximum time in which no
charge was made (Hr)
b13 Last Uncharged Time (Hr)
d00 Total Cell Number (individual)
d01 - d10 Cell Voltage 1 to 10 (m/V)
16
Press the or button (<0.5 s) to select
“Battery Info” in the “Information” menu,
and then press the button (<0.5 s) to
access it. Then press the or button to
scroll through the information options
shown in the table below.
Press the button (<0.5 s) to return to the
"Information" menu.
“Speed Limit” is displayed for information
only and cannot be changed.