![background image](http://html1.mh-extra.com/html/bafang/dp-c10-can/dp-c10-can_manual_3446276005.webp)
4
BF-DM-C-DP C10-EN November 2019
7.4 DISPLAY INSTALLATION
1. Open the clamps of display and insert
the rubber rings A on the handlebar.
(it is suitable for handlebar
∮
22.2 or
∮
31.8)
2.
Now place the display on to the handlebar
in the correct position, with two M4*8
screws (C), tighten the display (B the
clamps) into position. Torque requirement:
1N.m.
3.
Open the clamp (D) on the controller pad
and place it in the correct position (it is
suitable for handlebar:
∮
22.2).
4.
Using a M3*10 screw (E) tighten the
controller pad onto the handlebar. Torque
requirement: 1N.m.
5.
Please link the display to the EB-BUS cable.
h
:
The male connector from display.
H: The female connector from EB-BUS.