background image

26

BF-DM-C-DP C15-EN November 2019

  

7.7.1.3 "Brightness"  Display brightness

Press the 

 or 

 button (<0.5S) to 

highlight “Brightness” in the Display setting 
menu, and then press 

 button (<0.5S) 

to select. Then with the 

 or 

 button 

choose between "100%" / "75%" / "50%" 
/" 30%"/"10%". Once you have chosen 
your desired selection, press the 

 button 

(<0.5S) to save and exit to the "Display 
setting".

7.7.1.4 "Auto Off"  Set Automatic system 

switch off time

Press the 

 or 

 button (<0.5S) to 

highlight “Auto Off” in the Display setting 
menu, and then press 

 button (<0.5S) 

to select. Then with the 

 or 

 button 

choose between “OFF”, "9"/"8"/"7"/"6"/ "5"/ 
"4"/"3"/"2"/"1", (The numbers are measured 
in minutes). Once you have chosen your de-
sired selection, press the 

 button (<0.5S) 

to save and exit to the "Display setting".

7.7.1.5 "Service"  Switching the 

notification on and off

Press the 

 or 

 button (<0.5S) to 

highlight “Service” in the Display setting 
menu, and then press 

 button (<0.5S) 

to select. Then with the 

 or 

 button 

choose between “NO” or “YES”. Once you 
have chosen your desired selection, press 
the 

 button (<0.5S) to save and exit to 

the "Display setting".

7.7.2  "Information"

Once the display is turned on, press and 
hold the 

 and 

 buttons (at the same 

time) to enter into the setting menu, press 
the 

 or 

 button (<0.5S) to select 

“Information”, then press the 

 button 

(<0.5S) to confirm and enter into "Informa-
tion".  

Note:

 All information here cannot be changed, it is 

to be viewed only. 

7.7.2.1 Wheel Size

Press the 

 or 

 button (<0.5S) to 

highlight “Wheel Size”, then press the 
button (<0.5S) to confirm and view the 
wheel size. To return, press the 

 button 

(<0.5S) to exit back to the "Information".

Summary of Contents for DP C10.CAN












































Reviews: