background image

37

  BF-DM-C-DP E10-EN November 2019

DEALER MANU

AL FOR DISPL

A

Y

7.7 NORMAL OPERATION

7.7.1  Switching the System ON/OFF

Press and hold 

 (>2S) on the display to turn on the system. 

Press and hold 

 (>2S) again to turn off the system.

7.7.2  Selection of Support Levels

When the display is turned on, press the   or   (<0.5S) button to switch to the support level, the 
lowest level is 1, the highest level is 5. When the system is switched on, the support level starts in 
level 1. There is no support at level 0.

7.7.3  Headlights / backlighting

Hold the   (>2S) button to activate the headlight and taillights.

Hold the   (>2S) button again to turn off the headlight and taillight. (If the display is turned on in 
a dark environment, the display backlight/ headlight will be turned on automatically. If the display 
backlight/headlight are turned off manually, they also need to be turned on manually afterwards)

7.7.4  Walk Assistance

The Walk assistance can only be activated with a standing pedelec.

Activation: Briefly press   continuously until to level 0. At this point, briefly press   again and the 
indicator of the highest level will start to flash, then press   and hold (>2S), the level indicator will 
flash successively from 1st to 5th. Then the walk assistance mode is activated and the pedelec moves 
approx. 6 km/h.

Summary of Contents for DP C10.CAN












































Reviews: