15
OPERATION
CUSTOMER MANUAL
FRONT HUB MOTOR SYSTEM
LED
LED state
State of charge
Notes
First LEd flickers
≤ 5 %
When the system is triggered
in operation mode: Press the
button for 1 second for the
BMS to display the charge of
the battery on the LEds for
5 seconds. Hold down the
button for 5 seconds for the
BMS to display the capacity of
the battery on the LEds for 5
seconds. After this, the BMS
will turn off the LEd display to
save battery power.
One green light
5 < C < 10 %
Two green lights
10 ≤ C < 30 %
Three green lights
30 ≤ C < 50 %
Four green lights
50 ≤ C < 75 %
Five green lights
≥ 75 %
5.4 Charging the battery
You can charge your battery both while
mounted on the Pedelec and removed.
Lithium-ion batteries are not subject to a memo-
ry effect. You can recharge your battery at any
time, even after short trips.
Charge your battery at temperatures between
0 °C and 45 °C (ideally at room temperature or
20 °C). Give the battery sufficient time before
charging to reach this temperature.
Read the instructions on the charger before
charging.
1. First insert the plug of the charging cable
into the charging socket on the battery, then
the plug the charger into a socket.
2. As soon as the charger is connected to the
power supply, a red LEd will light up.
red
Charger with arrow and text "red LEd"
When charging is complete, the LEd changes
from red to green.
green
Charger with arrow and text "green LEd"
Charging time depends on various factors. It can
vary greatly according to the temperature, age,
usage and capacity of the battery. You can find
indications of possible charging times, if neces-
sary, in the technical data of the battery.
When the battery is fully charged, the charging
process is automatically terminated. Unplug the
plug from the battery and the power outlet.
