Metering with the PortaSonic 9000
22 / 55
UF_PS9000_BA_02_1108
The mounting belts are dimensioned by the manufacturer for the maximum pipe diameter of
the specific ultrasonic sensors ordered by you. In case of small size pipeline systems, it is
recommended to shorten the mounting belts before mounting them (approx. 4x the outside
diameter).
Illustration 8:
Tightener
Pass the tightener through one end of the mounting belt according to illustration 9.
Illustration
9:
Fixing the mounting belt
Bend the shorter end of the mounting belt around the tightener to prevent it from slipping off,
and follow the illustrations below to mount your ultrasonic sensors. If you choose to use the
mounting rail, it will be possible to install both sensors simultaneously to the pipeline. In any
case, the sensors must be fixed by means of the mounting belts.
Illustration 10:
Initial position
Illustration 11:
Threading up the mounting belt
