Metering with the PortaSonic 9000
15 / 55
UF_PS9000_BA_02_1108
1
6.3 Parametering by means of the Quick-Setup
The following steps are necessary to reach the “Parametering” function:
After having switched on your device, select „Setup“ during the start sequence and
then „Quicksetup“.
Select „Setup“ and afterwards „Quicksetup“ in the main measurement window „Flow
1“.
Start
Select, if you want to enter the pipe circumference or
the outside diameter of the pipe:
Enter the outside diameter of the
Enter the pipe circumference.
pipe.
OR
