background image

English

8

Lubricating the gearbox 

Lubricate the gearbox every 10 to 20 operating hours. 
1.  Put the grease gun onto the zerk fitting (c). 
2.  Force some grease into the zerk fitting. 

Transport and Storage

Store the machine, operating instructions and where 
necessary the accessories in the original packaging. This way 
you will not loose any information and parts.
Store the machine in dry and well ventilated area with the 
fuel tank empty. 
Transport the device using the original packaging to avoid 
damage or lost parts. Never transport the device before 
draining the fuel.

1.  Empty the fuel 
2.  Place the machine on even and stable surface. Warm up 

the engine for several minutes and then stop it. 

3.  Loosen the fuel tank cover and remove it.  
4.  Drain fuel into a container thoroughly. 
5.  Press the intake pump several times until fuel begins to 

empty the bulb.

6.  Drain fuel again.
7.  Reinstall the fuel tank cover. 

3 YEAR REPAIR ONLY WARRANTY 

The limited warranty set forth below is given by Badger 
with respect to new merchandise purchased and used in 
the United States & Canada, its possessions and territories. 
Badger warrants product for a period of six (6) years 
homeowner use and three (3) years commercial use 
commencing on the date of original purchase and will, at 
its option, repair or replace, free of charge, any part found 
to be defective in material or workmanship. This limited 
warranty shall only apply if this product has been operated 
and maintained in accordance with the Operator’s Manual 
furnished with the product, and has not been subject to 
misuse, abuse, commercial use, neglect, accident, improper 
maintenance, alteration, vandalism, theft, fire, water or 
damage because of other peril or natural disaster. Damage 
resulting from the installation or use of any accessory 
or attachment not approved by Badger for use with the 
product(s) covered by this manual will void your warranty as 
to any resulting damage. This warranty is limited to ninety 
(90) days from the date of original retail purchase for any 
Badger product that is used for rental purposes, or any other 
income-producing purpose.

hOW TO OBTAin sERViCE:

 Warranty service is available, 

WITH PROOF OF PURCHASE THROUGH YOUR LOCAL 

AUTHORIZED SERVICE DEALER. To locate the dealer in your 
area, call 

1-844-786-7335. 

No product returned directly to 

the factory will be accepted unless prior written permission 
has been extended by the Customer Service Department 
of Badger.

This limited warranty does not provide coverage in the 

following cases:

•  Tune-ups - Spark Plugs, Carburetor Adjustments, Filters
•  Wear items - Bump Knobs, Outer Spools, Cutting Line, 

Inner Reels, Starter Pulley, Starter Ropes, Drive Belts, Saw 
Chains, Guide Bars, Cultivator Tines, Blades.

•  Badger does not extend any warranty for products sold 

or exported outside of the United States of America & 
Canada, its possessions and territories, except those 
sold through Badger’s authorized channels of export 
distribution. Badger reserves the right to change or 
improve the design of any Badger Product without 
assuming any obligation to modify any product 
previously manufactured.

no implied warranty, including any implied warranty 

of merchantability or fitness for a particular purpose, 

applies after the applicable period of express written 

warranty above as to the parts as identified. no other 

express warranty or guaranty, whether written or oral, 

except as mentioned above, given by any person or 

entity, including a dealer or retailer, with respect to any 

product shall bind Badger. During the period of the 

Warranty, the exclusive remedy is repair or replacement 

of the product as set forth above.

 (Some states do not 

allow limitations on how long an implied warranty lasts, so 
the above limitation may not apply to you.)

The provisions as set forth in this Warranty provide the 

sole and exclusive remedy arising from the sales.
Badger shall not be liable for incidental or 

consequential loss or damages including, without 

limitation, expenses incurred for substitute or 

replacement lawn care services, for transportation 

or for related expenses, or for rental expenses to 

temporarily replace a warranted product.

 (Some states 

do not allow limitations on how long an implied warranty 
lasts, so the above limitation may not apply to you.)
In no event shall recovery of any kind be greater than the 
amount of the purchase price of the product sold. Alteration 
of the safety features of the product shall void this Warranty. 
You assume the risk and liability for loss, damage, or 
injury to you and your property and/or to others and their 
property arising out of the use or misuse or inability to use 
the product.
This limited warranty shall not extend to anyone other than 
the original purchaser, original lessee or the person for 
whom it was purchased as a gift.

how state law Relates to this Warranty: 

This warranty 

gives you specific legal rights, and you may also have other 
rights which vary from state to state.
To locate your nearest service dealer, dial 

1-844-786-7335

 

in the United States and Canada.

Summary of Contents for WBP26HT






















Reviews: