background image

final page size: 8.5 x 5.5 in 

BADGER

SAVE  THESE INSTRUCTIONS

DO NOT RETURN THIS UNIT TO THE RETAILER. PROOF OF PURCHASE WILL BE REQUIRED FOR  
WARRANTY SERVICE.

For assistance regarding the assembly, operation or maintenance of the unit, please call 1-844-786-7335  

(in the United States and Canada) or contact email box [email protected]

Warranty service is available through an authorized service center. To locate a service center in your area, please 

email us or call the number listed above. Service on this unit, both within and after the warranty period, should 

only be performed by an authorized and approved service center. When servicing, use only identical replacement 

parts. For additional information visit wildbadgerpower.com.

All information, illustrations, and specifications in this manual are based on the latest product information 

available at the time of printing. We reserve the right to make changes at any time without notice. The product 

may vary slightly from the illustrations contained in this manual.

IMPORTANT: Read this manual thoroughly before using this product. Follow all instructions.

OPERATOR’S MANUAL /MANUAL DEL OPERADOR

FULL-CRANK

HEDGE TRIMMER

CORTASETOS

MANIVELA COMPLETA

MODEL/MODELO: WBP26HT

Summary of Contents for WBP26HT






















Reviews: