background image

Garden Groom &
Volume Bag
Instruction Manual

Safety Hedge Trimmer

“PRO”

Problem

Action

Machine start

-

Check the machine is plugged in to a live supply.

Check that the waste container or volume bag extension tube

 

 

 

-

Check that you are pressing both main switch and 
front switch, ensuring safety switch has released main switches.
Contact dealer.

 

-

Machine does not collect

-

Check waste container is not full. 

-

Check volume bag hose (accessory) is not blocked.

-

Check exhaust is not blocked.

Note: The percentage of collection will vary 
on the condition and type of hedge being cut.

Damage to static or rotary blade

-

Unplug the machine immediately.

-

Contact the supplier

won't

is correctly attached and the main switch powerlight is on.
Remove and refit to be sure.
 

JML

Model no.

GG20

Input Voltage

230V  ~  50Hz

Rated Power (Watts)

500W

No Load Speed (rpm)

2900/min

Class II Appliance
Complies with European and British safety and EMC regulations
Noise levels : Sound pressure level: 82 dB(A),Sound Power Level: 
97 dB(A),Vibration level is 4.04 m/s

2

.

CONTAINS NO USER SERVICEABLE PARTS

Defects

Please retain your receipt! If this product is, or becomes defective, please return it to the place 
of purchase along with your till receipt.

Contacting Us

If you experience any difficulties in using this product, please write to us at the address below.

JML House, Regis Road, London, NW5 3EG, [email protected]

#j`™

Freephone 0800 781 7831

Shop online at 

www.JMLdirect.com 

Product Code: V0734, ©JohnMillsLtd/LH/05.09/AL/A

  

Summary of Contents for Garden Groom "PRO"







Reviews: