Badger Basket 3000+, Manual

Page: 1 / 22

SCOPE OF MANUAL
This manual contains information concerning the
installation, operation and maintenance of the Model
3000+ Micro-Chart Recorder. To ensure proper
performance of the meter, the instructions given in this
manual should be thoroughly understood and followed.
Keep the manual in a readily accessible location for
future reference.
Changes and additions to the original edition of this
manual will be covered by a "CHANGE NOTICE"
supplied with the manual. The change notice will explain
any changes made to the product described in this
manual.
MODEL 3000+ TABLE OF CONTENTS
Page Page
OPERATION
Unpacking and Inspection................................. 1 General Description................................................ 7
General Specifications ...................................... 2 Status Mode............................................................ 8
Calibration Mode.................................................... 9
INSTALLATION PROCEDURE Error Screens .......................................................... 15
Electronics Hexadecimal Conversions...................................... 16
Enclosure Mounting.......................................... 3 Illustrated Parts List ............................................... 18
Wiring Connections .......................................... 4 Troubleshooting Diagram ...................................... 20
UNPACKING &
INSPECTION
To avoid damage in transit, Eastech Badger products
are shipped to the customer in special shipping
containers. Upon receipt of the product, perform the
following unpacking and inspection procedures:
NOTE: If damage to the shipping container is evident
upon receipt, request the carrier to be present when the
product is unpacked.
a.
Carefully open the shipping container following
any instructions that may be marked on the box. Remove
all cushioning material surrounding the product and
carefully lift the product from the container.
Retain the container and all packing material for possible
use in reshipment or storage.
b. Visually inspect the product and applicable
accessories for any physical damage such as scratches,
loose or broken parts, or any other sign of damage that
may have occurred during shipment.
NOTE: If damage is found, request an inspection by the
carrier's agent within 48 hours of delivery and file a claim
with the carrier. A claim for equipment damage in transit is
the sole responsibility of the customer.
941072
5
1