SECTION 1:
BASIC INFORMATION
Congratulations on the purchase of your new Bad Boy Mower! The purpose of this manual is to assist
operators in maintaining and operating their machine. The information and instructions in this manual can
help you attain years of performance from your new Bad Boy. Also, check out our website to learn more
about the Bad Boy family.
1.1
All Bad Boy engines use 10W-30 engine oil. For maximum protection, Bad Boy synthetic blend
engine oil is recommended.
1.2
All Bad Boy hydraulic systems use 20W-50 engine oil (Conventional or Synthetic). Bad Boy
Hydrostatic oil is recommended.
1.3
All Bad Boy Mowers use hi-temp multi-purpose grease. NLGI No. 2 for the grease fittings.
1.4
Outlaw models have 12 psi in both front and rear tires.
1.5
Most Briggs, Kohler, Kawasaki, and Vanguard engines hold approximately two (2) quarts of motor oil.
Be careful not to over fill engine oil. Refer to the engine’s service manual.
Warranty Registration
The Warranty Registration form must be completed within 30 days to validate your warranty. As the new
equipment owner, you are expected to see that the form is completed and forwarded to Bad Boy, Inc.,
at time of delivery. Warranty is non transferable.
Warranty registration should be completed by the
selling dealership using the on-line registration site.
Model/Serial Number
Your Stand-On model serial numbers are found on the SIN plate inside podium and under the floor panel.
Also, these numbers can assist you in the ordering of new parts when replacements become necessary.
Parts/Service
Only Bad Boy replacement parts are to be used on your mower.
Replacement parts are available through your local Bad Boy Mower Dealer. Remember to always provide
the following information when ordering parts:
1. Correct part number
2. Correct serial number
All warranty repair and service must be handled through your authorized Bad Boy Mowers dealer.
To locate the nearest dealer, go to our website and click on Locate a Dealer.
EVAPORATIVE EMISSION CONTROL WARRANTY STATEMENT
Federal Evaporative Emission Control Warranty: Your Warranty Rights and Obligations
The Environmental Protection Agency (EPA), and Bad Boy Inc. are pleased to explain the evaporative emission control system’s warranty on your
2016
equipment. New equipment that uses spark ignition engines for off-road use must be meet stringent anti-smog standards. The evaporative emission
control system on your equipment is designed, built, and equipped so it conforms at the time of sale to the ultimate purchaser with the requirements
of 40 CFR 1060. The evaporative emission control system is free from defects in materials and workmanship that may keep it from meeting said
requirements. Bad Boy Inc. must warrant the evaporative emission control system on your equipment for two years provided there has been no abuse,
neglect or improper maintenance. If an evaporative emission control system component does fail in a manner that would cause the equipment to no
longer meet the requirements of 40 CFR 1060 within the first two years Bad Boy Inc. will replace the defective component. Your evaporative emission
control system may include parts such as fuel tanks, fuel lines, carbon canisters, fuel caps, valves, vapor hoses, clamps, or connectors.
PAGE 4
Summary of Contents for Outlaw Stand-On BBS 3600
Page 27: ...PAGE 27...
Page 53: ...PAGE 53...
