SECTION 3: ENGINE
PAGE
22
Kawasaki FX691V and FX730V
This machine has an oil drain hose installed on the
engine to allow for easier oil changes. Bad Boy
recommends that the oil and filter be changed at
intervals of 50 usage hours or yearly, whichever
occurs first. The oil capacity is 2 quarts. Bad
Boy 10W-30 synthetic blend engine oil is
recommended for maximum protection.
3.1 Changing your engine oil and oil filter
1)
Remove oil dipstick and open oil drain
u
sing a
10 mm socket or a flat head
screwdriver until oil begins flowing.
Allow oil to
completely drain. (Make
sure to have an oil pan ready to
capture old oil
and properly dispose old
oil.)
2)
The oil filter is located on the right side
of the engine. Clean area around oil
filter. Place a container under the oil
filter to capture any oil and remove
filter. Wipe off mounting surface and reinstall
drain plug. Torque to 10
ft.*lb.
3)
Place new f
il
t
er
in shallow pan with
open end up. Fill with new oil until oil reaches
the bottom of the threads.
Allow 2 minutes for oil to be absorbed
by filter material.
4)
Apply a thin film of clean oil to rubber
gasket on new filter
5)
Refer to instructions on oil filter for proper
installation.
6) Fill crankcase with approximately 2 quarts
of new oil. Level should top of indicator on
dipstick.
7) Reinstall oil fill/dipstick and tighten
securely.
8) Start engine; check for oil leaks. Stop
Engine; correct oil leaks. Recheck oil level
9) Dispose of used oil and filter in
accordance with local ordinances.
Summary of Contents for Outlaw Stand-On BBS 3600
Page 27: ...PAGE 27...
Page 53: ...PAGE 53...
