39
For
Non EPS
model, the MAXI fuse is located beside
the starter relay.
Replacing a fuse
The main fuse box and the EPS fuse box are located
under the seat.
If a fuse is blown, replace it as follows.
1.
Turn the key to “OFF” and turn off all electrical circuits.
CAUTION!
To prevent accident short-circuiting; turn off the main switch when checking or replacing a
fuse.
2.
Remove the blown fuse and then install a new fuse of the specified amperage.
WARNING!
Always use a fuse of the specified rating and never use a substitute object in place of the
proper fuse. An improper fuse or a substitute object can cause damage to the electrical
system, which could lead to a fire.
3.
Turn the key “ON” and turn on the electrical circuits to check if the devices operate.
4.
If the fuse immediately blows again, have a dealer check the electrical system.