30
1.
Calculates total operation time from the beginning of vehicle use.
2.
Count automatically begins with vehicle movement.
3.
TT data is stored in memory even when power is off.
Fuel Meter (Only for models with the function)
1.
7 bar graphic indicator of fuel status.
2.
Last bar flashes to indicate low fuel level.
BUTTON OPERATIONS
MODE BUTTON
1.
Press the MODE button to cycle through all of the available functions and display the
value for each.
ODO → RPM → TRIP A → TRIP B → MAX SPEED → SPEED AVG → RT →
TT → MAX RPM → TIME → EPS→ ODO
2.
Press the MODE button and hold it for 10 seconds to change the display between KMH
and MPH.
RESET FUNCTION
1.
Press the MODE button to scroll to the desired screen, then press the MODE and SET
buttons simultaneously and hold them for 6 seconds to reset the stored value to zero. Each
function must be reset individually.
2.
ODO, Clock and TT data cannot be reset.
TIME FUNCTION
1.
Press the MODE button to cycle through to the ODO screen for TYPE I or the TIME screen
for TYPE II, then press the MODE and SET buttons simultaneously for 3 seconds to set the
time.
2.
When the digit is blinking, press the SET button to reach the desired number then press the
MODE button to move to the next digit.
3.
After setting the time, press the MODE and SET buttons simultaneously to save the time
and go back to the ODO screen.
4.
During setting, if the digits are not changed for more than 10 seconds, the system will
auto-save and go back to the time screen.
5.
When speed is over 10 KMH, the setting will save automatically.
EPS (Electric Power Steering) FUNCTION
The EPS indicator turns on when you press the MODE button and scroll to the EPS function. You can
engage or disengage the EPS function as needed. The indicator will remain on when the EPS is
engaged and the ignition is turned ON, you can set the steering torque to Max or Min.
MIN:
Low steering torque, used for smooth terrain and high speed.
MAX:
High steering torque, used for rough terrain and low speed.
FAIL:
ESP failure, the screen will blink to indicate an EPS malfunction, the defect code will be shown
on the bottom line of the screen, the letter c followed by four numbers.
