22
6. 2WD/4WD/LOCK SWITCH
The 2WD/4WD/LOCK SELECT BUTTON is used to change the engine drive power to two wheels or all
four wheels. Select 2WD, 4WD or LOCK based on different terrain conditions.
2WD:
Engage the engine power on rear wheels only.
This is mainly used for normal riding.
4WD:
Engage the engine power on all four wheels. There is a limited slip gear assembly inside the
front differential to engage the right and left front wheels at different speeds. 4WD provides
much more traction than 2WD and should be used when riding on wet and slippery surfaces.
LOCK:
Engage the engine power on all four wheels without engaging the limited slip gear assembly.
This provides traction to all four wheels evenly and should be used when two or more
wheels lose traction.
2WD/4WD/LOCK Switch:
2WD/4WD
WARNING!
Always stop the ATV before changing from two-wheel drive to four-wheel drive and vice
versa. The ATV handles differently in two-wheel drive than in four wheel drive in some
circumstances. Changing from the two-wheel drive to four-wheel drive or vice versa while
moving may cause the ATV to unexpectedly handle differently. This could distract the
operator and increase the risk of losing control and causing an accident.
This ATV is equipped with a switch to change from two-wheel drive to four-wheel drive and vice
versa. Select the appropriate drive according to the terrain and the conditions.
“2WD” (two-wheel drive): Power is supplied to the rear wheels.
“4WD” (four-wheel drive): Power is supplied to the rear and front wheels.
To change from two-wheel drive to four-wheel drive, stop the ATV and push the button in to the
“4WD” position. Then, the four-wheel-drive indicator ” “ is displayed on the in the
multi-function display.
To change from four-wheel drive to two-wheel drive, stop the ATV and push the button in to reset it
to the 2WD position. The two-wheel drive indicator is displayed on the multi-function display.