16
PRE-OPERATION CHECKS
Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition.
Always follow the inspection and maintenance procedures and schedules described in Owner’s
Manual.
WARNING!
Failures to inspect or maintain the vehicle properly increase the possibility of accident or
equipment damage. Do not operate the vehicle if you find any problem. If a problem cannot
be corrected by the procedures provided in this manual, have the vehicle inspected by the
dealer.
Before using this vehicle, check the following points:
ITEM
ROUNTINE
Fuel
Check fuel level in fuel tank and add recommended fuel if
necessary.
Check fuel line for leakage. Correct if necessary.
Engine oil
Check oil level in engine and add recommended oil to specified
level if necessary.
Check ATV for oil leakage. Correct if necessary.
Final gear oil
Check ATV for oil leakage. Correct if necessary.
Differential gear oil
Check ATV for oil leakage. Correct if necessary.
Coolant
Check coolant level in reservoir and add recommended coolant
to specified level if necessary.
Check cooling system for leakage. Correct if necessary.
Front brake
Check operation, if soft or spongy, have the dealer bleed
hydraulic system.
Check brake pads for wear and replace if necessary.
Check brake fluid level in reservoir and add recommended
brake fluid to specified level if necessary.
Check hydraulic system for leakage. Correct if necessary.
Rear brake
Check operation and correct if necessary.
Lubricate cables if necessary.
Check lever and pedal free play and adjust if necessary.
Throttle lever
Make sure that operation is smooth. Lubricate cable and lever
housing if necessary.
Check lever free play and adjust if necessary.
Control cables
Make sure that operation is smooth. Lubricate if necessary.
Wheels and tires
Check wheel condition and replace if damaged.
Check tire condition and tread depth. Replace if necessary.
Check air pressure. Correct if necessary.