20
4. REAR BRAKE PEDAL
The rear brake (pedal) is located on the right side of the ATV. To apply the rear brake, push down on
the brake pedal.
WARNING!
Before each trip check whether the accustomed resistance is present when pressure is
applied to the brake lever. Check the brake fluid level, the level must be between the
minimum and maximum level markings.
Before each trip check the brake actuating system. The gap between the end of the brake
lever and the handlebar should be approximately 12 mm (0.5 inch). Inform your local
dealer of any deviations.
Irregularities of brakes such as leaks and poor performance should be dealt with by an
authorized dealer.
NOTE:
The brake fluid level must be above the MIN mark. If the level keeps going down, have an
authorized dealer check it.
Always use DOT #4 brake fluid.
12 mm