69
PARTS REQUIRED:
SINGLE DOOR - FRONT WALL
Refer to Page 20 for right hand swing single door note.
3" (7,6 cm)
x5
Center door in wall panel opening.
Hold door in position and keep level.
Install single door with black-painted hinge board.
FINISH
You have finished installing your single door.
2
3" (7,6 cm)
Screws
into the wall support
and foor frame.
3
Screw hinge board into wall supports and floor with (5) 3" screws as shown.
Make sure screws go into framing and foor
(Fig. D, Fig. E)
.
Measure gap
(Fig. B)
between door trim and wall panel, as shown.
Hold door in position and keep level.
Hinge-board must overhang wall panel at measurement shown
(Fig. C)
.
Bottom of door trim is even with the wall panel, as shown.
5/8"
(1,0 cm)
5/8"
(1,6 cm)
5/8"
(1,6 cm)
5/8"
(1,6 cm)
BEGIN
1
x1
Painted
Black
on Ends
UNIVERSAL DOOR
Left
Angle 3" (7,6 cm)
Screw
Fig. E
Fig. D
Fig. B
3/8"
(1,0 cm)
Fig. C
3/8"
(1,0 cm)
Door trim even
with panel.