34
Install all panels with the primed side facing up.
BACK WALL
PARTS REQUIRED:
48 x 84"
(121,9 x 213,4 cm)
x1
x50
2" (5,1 cm)
Place 1st
48 x 84"
panel onto wall frame flush to top of frame, as shown.
Use the gauge block to mark the 3/4" measurement on the wall stud.
Secure panel with (2) 2" nails in the corners
(Fig. A)
.
Secure the panel with 2" nails spaced 6" apart on edges and 12" apart inside panel.
Ensure your wall frame is square by installing one panel and squaring frame.
Move to the opposite end. Using the long edge of the panel as a lever move the panel side-to-side until you have
a 3/4" measurement on the wall stud. Secure corner with (2) 2" nails
(Fig. B)
.
3
2
3/4" GAUGE
BLOCK
GAA
2 Nails
Fig. B
Fig. A
3/4"
(1,9 cm)
3/4"
(1,9 cm)
2 Nails
3/4" GAUGE
BLOCK
BEGIN HERE
Flush
3/4"
(1,9 cm)
6"
(15,2 cm)
12"
(30,5 cm)
48"
(121,9 cm)
For squareness maintain fush and
3/4" measurement along panel edge.
