48"
(121,9 cm)
3/4"
(1,9 cm)
4"
(10,2 cm)
3/4"
(1,9 cm)
12"
(30,5 cm)
6"
(15,2 cm)
17
For squareness maintain 3/4"
measurement along panel edges.
BACK WALL PANELS
Install all wall panels with the primed side facing up.
48 x 72"
(121,9 x 213,4 cm)
PARTS REQUIRED:
x1
x45
2" (5,1 cm)
Fig. B
BEGIN HERE
Fig. A
3/4"
(1,9 cm)
3/4"
(1,9 cm)
2 Nails
2 Nails
DOOR
Install
48 x 72"
panel onto wall frame flush to top of frame, as shown.
Use the gauge block to mark the 3/4" measurement on the wall stud.
Secure panel with (2) 2" nails in the corners
(Fig. A)
.
Ensure your wall frame is square by installing one panel and squaring frame.
Move to the opposite end. Using the long edge of the panel as a lever, move the panel side-to-side
until you have a 3/4" measurement on the wall stud. Secure corner with (2) 2" nails
(Fig. B)
.
Secure the panel using 2" nails spaced 6" apart on edges and 12" apart inside panel.
3
2
3/4" GAUGE
BLOCK
GAA
3/4" GAUGE
BLOCK
