28
3" (7,6 cm)
x42
RAFTERS
PARTS REQUIRED:
DOOR
2 x 4 x 93-3/16" (5,1 x 10,2 x 236,7 cm)
x7
BOA
Your rafters are now installed.
FINISH
Place rafter on front and back wall doublers. Line up rafter centered with marks. Ensure
rafter is fl ush to back wall panel
(Fig. A)
and fl ush down on top of back wall doubler
(Fig. B)
.
Secure back of rafter with 3" screw installed centered into outer rafter end
(Fig. A)
.
Secure each end of rafter into doubler with 3" screws driven-in at an angle
(Fig. B, Fig. D)
.
Repeat steps 2 through 5 to install (6) remaining rafters.
Line up rafter centered with marks on front doubler. Ensure rafter is fl ush to front wall panel
(Fig. C)
. and resting
fl ush on top of front doubler
(Fig. C)
.
Secure front of rafter with 3" screw installed centered into outer rafter end
(Fig. C)
.
2
3
5
6
3" (7,6 cm)
Screw
Flush
Fig. A
3" (7,6 cm)
Screws
angled.
Flush
Fig. B
3" (7,6 cm)
Screws
angled.
Fig. D
DO NOT OVER-DRIVE SCREW THROUGH PANEL.
BEGIN
Measure and mark location of each rafter.
1
4
10"
(25,4 cm)
26"
(66,1 cm)
42"
(106,7 cm)
58"
(147,4 cm)
90"
(228,6 cm)
106"
(269,3 cm)
74"
(188 cm)
DOOR
3" (7,6 cm)
Screw
Flush
Fig. C
Flush
BEGIN HERE
