34
x1
x4
ROOF PANELS
PARTS REQUIRED:
2" (5,1 cm)
DOOR
7/16 x 48 x 96"
(1,1 x 121,9 x 244 cm)
48 x 96"
(121,9 x 244 cm)
3/4" GAUGE
BLOCK
GAA
Move to the opposite end. Using the long edge
of the panel as a lever move the panel side-to-
side until the top corner is at 1/2" measurement
overhanging the rafter extension
(Fig B)
.
You may need to move your entire roof
frame to make panel line up with 1/2"
overhang measurement
(Fig. B)
.
Secure panel with (2) 2" nails into rafters.
2
You must square the roof by attaching one panel first. You will use the panels’ long
edge as a lever to bring your roof into square. Commonly known as “racking”.
Roof panels may cause serious injury until securely fastened.
Install all roof panels with the rough side up (painted grid lines).
1
BEGIN
Install the
48 x 96"
panel with 1/2" measurement
overhanging the rafter extension
(Fig B)
and the panel is 3/4" along the the length of the rafter
(Fig. A)
.
Secure panel with (2) nails as shown.
48"
(121,9 cm)
Two Nails
Two Nails
3/4"
(1,9 cm)
Fig. A
Gauge
Block
DOOR
DOOR
1/2"
(1,3 cm)
Fig. B
NOTE:
Measurement from rafter extension.
1/2"
(1,3 cm)
Fig. B
NOTE:
Measurement from rafter extension.
