49
1" (2,5 cm)
BEGIN
Secure bolt with screws supplied. Drill a 5/16" hole for bolt to extend into.
Install bolt with screws supplied and drill 5/16" hole for bolt to extend into.
Install lower spring bolt onto
OO
in open position with bolt end 1/2" up from fl oor.
Bolt is open when loop is contacting base
(Fig B)
.
2
3
Install upper spring bolt onto
OO
in open position with bolt end 3/8" down from frame.
Bolt is open when loop is contacting base
(Fig A)
.
Mark and pre-drill holes for screws.
Mark and pre-drill holes for screws.
1
LEFT
DOOR
PARTS REQUIRED:
DOOR HARDWARE
x2
x8
5/16" (0,8 cm) Drill Bit
Your spring bolts are now installed.
FINISH
Fig. A
Fig. B
FLOOR
Loop contacts
base.
x4
x4
1/2"
5/16" drill for
bolt: 1" deep.
Loop contacts
base.
PRE-DRILL
(4) HOLES
PRE-DRILL
(4) HOLES
2 x 3 x 69"
2 x 3 x 69"
3/8" with bolt in open
position.
OPEN POSITION,
Spring is loose.
OPEN POSITION,
Spring is loose.
5/16" drill for bolt:
1" deep.
OVER DOOR FRAME
OO
OO
LOCATE AND PRE-DRILL HOLES TO AVOID SPLITTING WOOD
