13
48"
(121,9 cm)
120"
(304,8 cm)
6"
(15,2 cm)
12"
(30,5 cm)
DOOR
Move to the opposite side. Using the long edge of the panel as a lever, move the
panel side-to-side until the top corner is flush to the floor frame
(Fig. B)
.
Secure panel with (2) 2" nails in the corners.
2
BEGIN
1
3
4
Continue securing the panel with 2" nails spaced 6" apart on edges and 12" apart inside panel.
Use a chalk line or use pre-painted grid lines to nail into joists under panel.
Ensure your floor frame is square by installing one panel
and squaring frame.
Fig. A
Fig. B
Check the floor frame is square by measuring diagonally across the frame corners. If the measurements are the
same your floor frame is square. The measurement will be approximately 150" (381 cm)
(Fig. C)
.
PARTS REQUIRED:
x1
x50
5/8 x 48 x 96"
(1,6 x 121,9 x 243,8 cm)
Grid lines up
Seam
Seam
2" (5,1 cm)
Flush
Flush
Flush
(2) Nails
(2) Nails
3/4"
(1,9 cm)
3/4"
(1,9 cm)
DOO
R
150"
(381 cm)
150"
(381 cm)
Install the
48" x 96"
panel with the rough side up (painted-grid lines side) with the 48"
edge and corner flush to the floor frame
(Fig A)
.
Secure panel with (2) 2" nails in the corners.
Fig. C
FLOOR PANELS
DOOR
