![background image](http://html1.mh-extra.com/html/backyard-products/03-0031-g/03-0031-g_manual_3348653009.webp)
as shown on the Custom Framing Dimensions first page as those should
3-3/8" or less
vertical slats must be
not change.
for a custom application. Follow the locations for the 2 x 4 and the 2 x 6
Note: for this Exit Setting the deck could go from 57-7/16 up to 59-9/16
Spacing between
Swing
Beam
Underside
7
Railing
"
25"
deck
16
57
height
Width
Opening
slide entry
Bottom of
"
16
9
1
2
59
"
8
27 9
16 "
Deck to
31 1/16"
Top of railing
Custom Framing Dimensions (Exit Setting - LOW)
Custom playset builders this is the "inside view" of the slide as if the rider is about to go down
the slide from the deck level. Note that the railing in the configuration is about 31" high. By
playset safety rules this railing with vertical slats has to be 27" or higher. If you decide to raise
your deck up level with to the slide entry bottom then this railing height will decrease from
31-1/16" as shown to 28-15/16". So you will still be in compliance with safety rules. For more
information on playset safety rules visit the link on the Playset Surfacing Recommendations
page in the beginning of this manual.
NOTE: FALL HEIGHT FOR LOW EXIT SETTING = 57-1/2” TO 59-1/2”.
9