STEP 20C: Slide to Playset (High Setting)
1. Make a mark onto the Top Rail at the center of the opening at 91-7/8” from the ground.
Have an assistant help you lift the slide. Place the Slide Mount Bracket on top of the Cross
Brace that is 31-15/16” from the ground.
2. Align the Slide Entry with the mark. Make sure the side of the slide is parallel to the side of
the corner post. Have your assistant hold the slide in place while you make marks at all of
the holes in the Entry.
3. Drill twelve holes 1/8” diameter by 1” deep at each mark.
4. Install a 1/4” x 1-1/4” Wafer head lag screw at each hole.
5. Go to the Slide Mount Bracket and drill a 1/8” diameter by 1-1/4” deep hole through each
hole in the bracket. Install a 1/4” x 1-1/4” Wafer head lag screw at each hole.
Only use this setting for a play set deck height that is 61-3/4”
"
16
1
"
91 8
1
7
31 15
16 "
Slide Mount Bracket
on Cross Brace
Slide
parallel
to post
1/4” x 1-1/4”
Lag Screw
1/4” x 1-1/4”Lag Screws
(after Entry is mounted)
42
