![background image](http://html1.mh-extra.com/html/backyard-products/03-0031-g/03-0031-g_manual_3348653010.webp)
not change.
Note: for this Exit Setting the deck could go from 59-9/16" up to 61-11/16"
for a custom application. Follow the locations for the 2 x 4 and the 2 x 6
as shown on the Custom Framing Dimensions first page as those should
Swing Beam
25"
Opening
Width
slide entry
59
"
Deck
16
9
31 1/16"
Height
Top of railing
Bottom of
"
11
16
16 "
Deck to
Railing
Underside
27 9
61
2 18 "
Spacing between
vertical slats must be
3-3/8" or less.
Custom Framing Dimensions (Exit Setting - Middle)
Custom playset builders this is the "inside view" of the slide as if the rider is about to go down
the slide from the deck level. Note that the railing in the configuration is about 31" high. By
playset safety rules this railing with vertical slats has to be 27" or higher. If you decide to raise
your deck up level with to the slide entry bottom then this railing height will decrease from
31-1/16" as shown to 28-15/16". So you will still be in compliance with safety rules. For more
information on playset safety rules visit the link on the Playset Surfacing Recommendations
page in the beginning of this manual.
NOTE: FALL HEIGHT FOR MIDDLE EXIT SETTING = 59-1/2” TO 61-1/2”.
10