51-7/8" x 47-3/8" deck.
YES
If you are installing the slide onto a custom playset
This diagram is based upon a
NOTE:
swing beam safety zone. That is not acceptable.
OPTION 1
OPTION 2
then the deck width could be narrower than 51-7/8".
OPTION 3
YES
In that case the tube slide would protrude into the
NO!
A note on the Slide Safety Zone:
The Slide Safety Zone for this
slide is 72" long x 64" wide. If the
Safety Zone for your playset
is farther than the end of the
Slide Safety Zone then you must
extend the Slide Safety Zone to
the outer edge of the playset
safety zone.
"
8
51
72"
"
7
47 38
64"
Tube Slide Placement QC Turbo for Custom Applications
Below is a picture of a generic tower showing placement of the tube slide on all three
available sides. You may not overlap safety zones. The slide itself may not occupy the
swing beam safety zone. That is why Option 3 says "NO" beside it.
If you purchased a playset and are using these directions to construct your slide then these
are NOT instructions to change the location of your slide on the playset. Follow the
placement directions for your playset to attach it to the playset.
6
