Step 21
Attach
X20-G Rocks
to
W100491
and
W100492
Rock Wall Boards using ¼” x 1” Phillips Truss Head Bolts and
Lock Washers and ¼” Barrel Nuts and Fender Washers.
Set Rock Wall Rails
W100488
and
W100487
up against G12 Floor Rail and attach
W100490 Rock Wall End
Board
to end of Rails using 1 ½” Wood Screws.
Attach
W100493 Bottom Rock Wall Board
to Rock Wall Rails with 1 ½” Wood Screws.
Starting at bottom and spacing evenly attach a
W100489
then a W100492 then a W100491 and repeat to top of
Rock Wall using 1 ½” Wood Screws.
Flush Rock Wall End Board with top of floor and using holes in floor rail as guide pilot drill Rock Wall Rails with 3/16”
drill bit and attach Rock Wall to floor rail with 5/16” x 2” Lag Screws and Lock Washers.
W100488
W100487
W100490
ITEMS NEEDED
4-W100491 Rock Wall Boards
4-W100492 Rock Wall Boards
5-W100489 Rock Wall Boards
1-W100488 Rock Wall Rail
1-W100487 Rock Wall Rail
1-W100490 Rock Wall End Board
1-W100493 Bottom Rock Wall Board
HARDWARE NEEDED
24-1/4” x 1” Phillips Truss Head Bolts
24-1/4” Barrel Nuts
4-5/16” x 2” Lag Screws
24- Fender Washers
58-1 ½” Wood Screws
24-5/16” Lock Washers
4-Bolt Lock Washers
BOLT
5/16”
LOCK
WASHER
ROCK
BO
ARD
FENDER
WASHER
BARREL
NUT
Use 1/4” x 1” Phillips Truss Head Bolt with 5/16”
Lock Washer. Then place
Washer on Barrel
Nut and attach Rock to each board.
Fender
Diagram 1
W100493
W100492
W100491
W100489
PAGE 43
