GDC-350 Operation Manual
5909-9000 Rev 1
1
1. OVERVIEW
1.1. General Description
The GDC-350 is an economical, self-contained gas detector for non-hazardous (non-
explosion rated) commercial applications. It is available in two basic configurations:
single-sensor models and dual-sensor models. The sensors can be configured as
one of the following:
x
one on-board (A type)
x
one remote (B type)
x
one
on-board
and one remote (D type)
x
two on-board (E type).
A basic system provides LEDs to indicate Power, Fail, Low (Warning) Gas Alarm, and
High Gas Alarm. Also included are an integral audible alarm with door-mounted
silence push-button, audible time delay, field-settable relay time delays and two alarm
relays.
Gas-specific electrochemical sensors for toxic gases and oxygen are available while
MOS solid-state sensors for combustible gases, TVOCs, and refrigerants are also
available. All GDC-350 on-board sensors are packaged as plug-in “smart” sensor
modules to reduce field maintenance time.
1.2. Key Exterior Components
Figure 1-1. Standard GDC-350 Components
NOTE:
Photos of the GDC-350 in this manual may show the optional
LED digital display and/or the optional splash guard.
