Instruction 24-9428
6
Fyrite Tech
3.3 Connecting the Probe
Connect the probe assembly’s flue-gas hose and thermocouple connector to
the analyzer as follows (see Fgure 3-2):
1. Push the flue gas hose onto the analyzer’s GAS inlet fitting.
2. Push the flue gas thermocouple into the T-STACK jack
Important:
DO NOT force thermocouple connector. The con-
nection tabs are different sizes, allowing the connector to fit
in only one way.
Inspect the flue-gas hose for cracks. Replace the hose if it is defective.
Before usng the analyzer, check that the Water Trap / Flter s dry and
not dirty. If necessary, dry out the trap and replace the filter element per
Secton 5.6.
