BABYTREND HYBRID, Owner'S Manual

Page: 8 / 50

13 14
4.0
Preparing Car Seat for Use
4.0
Preparing Car Seat for Use
4.0
Preparing Car Seat for Use
The steps to prepare the Car Seat for use with your child are
outlined below and described in detail in this owner’s manual.
4.1 Assemble the Back Support
Before using your Car Seat in your vehicle, you must assemble
the Back Support to the Seat Base (see “Assembly and Removal
of Back Support” section).
Refer to page 72 Section 10.1
4.2 Determine the Use Mode and Prepare the Car
Seat for your Child
Toddler Car Seat WITH Built-in Harness System “22 - 50 lbs.”
(10 to 23 kg) (see Weight and Height Recommendations”
section).
- Use Body Insert with smaller child.
- Harness strap height must be at or
above child’s shoulder.
- Adjust the harness strap height to fit
your child (see “Changing Harness Strap
Height”
Section 10.3
).
- Discontinue use of Body Insert when child’s
shoulders are above Harness Strap Slots in second
row up from the bottom on the back support.
High-back Booster Car Seat WITHOUT Harness System
“40 - 100 lbs.” (18 to 45 kg) (see Weight and Height
Recomendations” section).
- Remove the harness system for Booster Car Seat Use
(see “Threading and Removing Harness” section
page 79).
- Remove Body Insert.
- Adjust head support for your child (see”Adjusting the
Head Support” section page 83).
Backless Booster Car Seat WITHOUT Harness System “40 - 100
lbs.” (18 to 45 kg) (see Weight and Height Recommendations”
section).
- Remove Back Support (see “Assembly and Removal of
Back Support”
Section 10.1
).
4.3 Select a Vehicle Seating Location to Install the
Car Seat
Toddler Car Seat WITH Built-in Harness System
• Select a vehicle seating location with a tether anchor, if
available. Baby Trend requires using the tether for
installation whenever possible.
Note: The belt routing for installation is dependent on
Tether use. Use “
Front Entry
” belt routing when using
WITH a Tether . Use “ Rear Entry ” belt routing when using
WITHOUT a Tether .
Booster Car Seat WITHOUT Harness System
• Select a vehicle seating location with a lap/shoulder belt.
• Never use a vehicle seating location with only a lap belt.